Alert Analyzers are delivered ready
to analyze, monitor and control all
of the common ion concentrations
in water 24 hours a day, every day.
Alert Ion Analyzer
ONLINE PROCESS ANALYSIS starting from AUD 8'700 only! Alert on-line Analyzers come complete, preconfigured and programmed for their specific applications. Just connect the power,
sample and reagent lines and within less than two hours the units are up and running. The Alerts are also easy to maintain
because of the applied measuring techniques and materials. Reagent usage is low with typically less than 2.5 liters per month at
100 analyses per day. Powerful conditional actions can be performed in the case of unusual analysis results; no value, out of limit
or range or unstable values can be used to prompt diagnosis, cleaning, calibration or change of analysis frequency.
Optional reagent level, sample present or leak detectors and other I/O signals for sample preconditioning are available for
further automation of the system.
The Alert Ion Analyzer uses the unique Dynamic
Standard Addition method which has been developed by
Applikon to improve the accuracy and reliability of ion
selective electrodes (ISE's).
An amount of buffer solution is added to a precisely
delivered quantity of sample in the measurement cell
to create the right medium for the measurement.
Based on an initial reading of the ISE the Alert will calculate
and dispense an optimal volume of standard solution.
The Alert will then take the second reading and calculate
the correct ion concentration.
In this way each analysis is validated and unaffected by
electrode drift or other compounds in the sample.
• robust measurement at low drift
• less affected by fouling
• validation of ISE performance
• large measuring range
Ready to work: On-Line Ion Analyzerfrom AUD 8'700 only!
