|
High-end titrator with built-in buret drive for volumetric Karl Fischer titrations.
|
890 KF Titrando with Tiamo™ 1.3 light
High-end titrator with built-in buret drive for volumetric Karl Fischer titrations. With four MSB connections, one measuring interface and USB connection. Including tiamo™ light, 803 Titration Stand and exchange unit 10 mL.
>> Details...
The Karl Fischer water determination is one of the most frequently applied laboratory methods. In contrast to other water determination methods, it is specific as well as rapid and requires no expensive equipment. With an application range of 0.1% to 100% water the volumetric Karl Fischer titration is used in a wide variety of fields. No matter whether you determine the water content in food, cosmetics or pharmaceutical products, the 890 Titrando is always the right instrument.
The sophisticated control algorithm of the Titrando has been adapted to the characteristics of the Karl Fischer reaction and guarantees highly precise results. You can choose between a polarized alternating current (Ipol) or a defined voltage (Upol) to be applied to the electrode. Both working modes yield fast and precise results.
Different reagents require different parameters. The 890 Titrando lets you select the appropriate method for each type of reagent.
With the 890 Titrando, Touch Control and 803 Ti Stand you acquire a titration system that meets all imaginable requirements and demands no compromises.
Just one example: the KF icons show you at a glance whether the instrument is still busy conditioning or whether you can start the water determination.
The electrode test and the newly created parameter «safety stop» prevent cell run-over during conditioning. If, for example, the electrode is not connected correctly or the titration cell is very humid, conditioning is stopped after a given time or a given volume of KF reagent added. This new feature increases work safety in your laboratory.
Use the 803 KF Titration Stand not only for stirring, but also for manually exchanging the spent titration vessel contents. With the integrated membrane pump, solvent can be aspirated or added without the cell having to be opened. This means vastly reduced conditioning times.
|
